NM Base 801 heavy anti-corrosion coating additive
NM Base 801 has special physical electrochemical properties in perfect combination with organic phase
Recently, Zhongxing Yuanyuan launched a new type of additives to promote the improvement of anti-corrosion efficiency, to solve the problem of corrosion resistance of equipment under special working conditions. Use alone can make the epoxy paint salt spray resistance data up to 2400 hours. The product can be used with alkyd, epoxy, acrylic and other film forming resins.
According to reports, this nano porcelain corrosion resistant catalyst product is mainly used in the development of a new generation of heavy anti-corrosion coating, different from the traditional zinc coating (epoxy zinc rich, cold spray zinc coating, etc.) sacrificial anode reaction mechanism, the corrosion resistance principle of this nano porcelain corrosion resistant catalyst product is nano barrier, anode protection and cathode inhibition. After repeated reduction and oxidation (with self-healing function), passivation iron produces a dense oxide film isolation layer, which can prevent the passage of small molecules (water molecules, chloride ions, etc.) corrosive media. The corrosion resistance life of the coating prepared by the coating is much higher than that of the coating containing zinc.
In the application, xylene, ethanol, ethylene glycol butyl ether, water and other prefabricated slurry can be used, which has good compatibility (as shown in the figure below), and can be used for solsol-based coatings, water-based coatings, UV coatings, powder coatings, etc.
In the preparation of epoxy paint in the laboratory, the duration of neutral salt spray resistance of the cured epoxy resin is about 200 hours, and the duration of neutral salt spray resistance can be extended to 1800 hours (internal measured data) after the addition of nano-porcelain corrosion resistance catalyst, while improving and enhancing the crosslinking density of the paint film, improving adhesion, friction resistance and hardness.
At present, the company has released this product in the wechat mini program: ChemDirect找货助手, 化塑链工业超市 and other platforms, and also launched a crowdtest invitation to welcome more friends inside and outside the industry to test and test. You can call 0312-6670714 to make an appointment and get technical data and samples.